Hot Tips for AC Electric Motor Maintenance

May 7, 2019 6:01 pm Published by Leave your thoughts

To get the most out of any electric motor, you’re going to need to keep up with all the proper maintenance tasks, just as you would with any other type of motor or mechanical system. It’s also important to make sure that the motor always operates in an optimal environment. Regular preventative maintenance helps you keep that equipment in great shape for years to come and get the most efficient operation out of it, so you can have the right amount of power for the job you need to complete without any unnecessary strain.

With this in mind, here are a few tips for maintaining your AC electric motor in Lubbock, TX that you would do well to follow:

  • Keep moisture levels in check: One of the biggest environmental hazards for electric motors is moisture. If your electric motor has long-term exposure to a humid, moist environment, there’s the potential for condensation to start to build up in some of the motor’s interior parts while it’s not being used. Over the course of time, this can result in problems with rust and corrosion, as well as other potential issues. If you don’t have any other choice but to leave the motor in a humid environment, it is advisable to use a kind of grease that is infused with rust prevention substances whenever you oil up the bearing assemblies. Even if you’re not focusing on those assemblies, it can make for a solid preventative measure.
  • Be careful of over-lubrication: As you likely know, you need to regularly lubricate your machine for it to operate properly and for you to avoid metal-on-metal friction. However, knowing how to get that done correctly is also critical, as there is such a thing as over-lubrication of motor components. Using too much grease can result in some major motor problems, so always be sure you’re following instructions with regard to the amount of grease and intervals of lubrication, and that you’re using the correct type of lubricant.
  • Protect against vibrations: It’s important to protect your motors from an excessive amount of vibration, especially if the motor isn’t running. Idle motors are subject to vibrations because the bearings can vibrate in place and rub away the grease, which makes metal-on-metal contact more likely the next time the motor runs. This means you should not store motors near other active motors or other tools that could cause vibrations.
  • Track your maintenance: It’s very helpful to keep a thorough record of all the maintenance you’ve performed on your motor. Write down what tasks have been performed every single time you service the motor so you can avoid performing the same tasks too frequently. This will also give you a great reference sheet for any problems the motor has experienced and how you resolved them.

These are just a few of the best tips you can follow with regard to maintenance for your AC electric motor in Lubbock, TX. For more information about keeping your motors in great shape, contact M.B. McKee Company, Inc. with your questions.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *

M.B. McKee Company, Inc.