Getting Ready for Your Grain Harvest

The days are getting shorter, and that means harvest is just around the corner. Are your crops, equipment and conveyor components in Lubbock, TX ready for the season?

A few key preparation steps are important to take for a successful harvest. Use the following tips to make sure your harvest is plentiful this season.

Prep Your Equipment

Is your combine ready for the harvest? Start by studying your owner’s manual. Review this for the appropriate settings and maintenance items that you should focus on each season. Inspect all belts and chains, oiling as needed and replacing any worn parts. This will help you avoid breakdowns and more costly maintenance down the line. Check cutter bars and knife sharpness for optimal operation. Don’t forget to stock up on extra supplies, too, such as filters and fluids you’ll need throughout the season. Lastly, calibrate your systems and clean everything so it’s perfectly set for the harvest.

Once you’ve prepped your combine, it’s time to move on to your conveyor components in Lubbock, TX. Getting your grain harvest in from the field is only the first step. You must then be able to process it appropriately for market or personal use. Check your conveyor systems for any signs of wear and tear. Replace any worn parts now, so they won’t break down in the middle of harvest season. Test all conveyor components in Lubbock, TX to ensure proper functioning ahead of time. Be sure to follow all safety procedures appropriate for your system during testing and operation.

Check Your Grain

After you’ve prepped your equipment, check to see if your grain is ready for harvest. This may sound like a very technical process, but there are some simple steps you can take to test your grain for readiness. First, look at its color. If your grain is ready for harvest, it will have no traces of green left on the spikes. Next, bite it. When you put a kernel of grain in your mouth and bite it, does it crunch? If it’s soft and chewy, it’s not ready for harvest. If it’s nice and crunchy, you’re good to go. A third sign that grain is ready for harvest is nodding. The seed heads start to “nod” (bow) when they are ready for harvest. Look for this arch to know it’s time to harvest your grain.

Partner with the Pros

Whether you need new equipment as you prep for harvest or encounter needs during the season, it’s good to have a pro in your corner. Look to a local supplier who can get you the conveyor components in Lubbock, TX you need to keep your season running smoothly.

Serving Lubbock Since 1943

M.B. McKee Company, Inc. is your go-to source for grain harvesting supplies. Our products include bearings, belts, chains, conveyor systems, gearing, lifts, motors, drives, tools, valves, and fittings. Our engineering division also provides general formulas, NEMA motor frames, elevator legs, screw and belt conveyors, lift charts, components from Baldor and Flexco and various interchangeable parts. Locally owned and operated, we take pride in partnering with farmers to help make their harvest season a success.

Categorised in: Conveyor Components

This post was written by Writer